Probably Due To Network Congestion

Posts Tagged ‘flaked oats

BoomStick – I’m brewing this for NCB member Paul Bromley who runs a back-garden charity event, he asked me if I’d brew something pale for it, so here it is, its an evolution from my Chinook Blonde recipe, using some of the same hops (but more of them) and adding some Weyermann Munich Type I, and mashing at 69°c, fermenting with Safale us-05.
This time the name again comes from a line Ash says in Army of Darkness “This… is my Boomstick!”

Alright you Primitive Screwheads, listen up! You see this? This… is my boomstick! The twelve-gauge double-barreled Remington. S-Mart’s top of the line. You can find this in the sporting goods department. That’s right, this sweet baby was made in Grand Rapids, Michigan. Retails for about a hundred and nine, ninety five. It’s got a walnut stock, cobalt blue steel, and a hair trigger. That’s right. Shop smart. Shop S-Mart. You got that?

Fermentables:
Pale Malt – 70%
Munich Type I (Weyermann) – 20%
Flaked Oats – 5%
Carapils (Weyermann) – 5%

Hops:
UK Cascade – 5.7 % @ 60 mins – 21g (FWH)
UK Cascade – 5.7 % @ 30 mins – 21g
Chinook – 12.5 % @ 10 mins – 21g
Cascade – 7.9 % @ 10 mins – 21g
Chinook – 12.5 % @ 0 mins – 49g (94c Steep for 25mins)
Cascade – 7.9 % @ 0 mins – 49g (94c Steep for 25mins)

Final Volume: 25 Litres
Original Gravity: 1.037
Final Gravity: 1.009
Alcohol Content: 3.7% ABV
Mash Efficiency: 75 %
Bitterness: 33 EBU
Colour: 9 EBC
Mash: 69°c for 70mins
Boil: 60mins

The malts, all pretty pale:
Image
The hops:
Image
Second batch sparge liquor going in at 78°c:
Image
In go the Cascade & Chinook for the flameout steep:
Image
I decided to rehydrate my yeast today to try and get things underway faster, I want a speedy ferment with time to put this beer in cask to condition before Paul’s event:
Image
The money shot, I got 1044 and liquored back to 1037 with 4 litres giving me a total volume of 25.7 Litres, a goodly amount for filling a plastic pin cask:
Image
No messing, done and dusted.

*25th Apr ’13 – Steady gravity reached, exactly as predicted FG, chilling down before casking this beer.

*Casked 27th Apr ’13 – with 20g white sugar and Allkleer finings, got a few 500ml bottles from it too which I give 3/4 Tsp white sugar each.
Charity beer in cask, ag#99 few spare yeasty bottles thanks to brewing 25LI’m going to give the cask a couple of days of warm then chill it down to cellar temps.

*1st May ’13 – Had a cheeky bottle of this, and its bloody good, plenty of juicy hops with a nice balance between the Cascade & Chinook, Chinook not overpowering just nice 🙂

Klaatu Verata Nictu – The New Years Day BrewAthon 2013. It was a year ago that a few of us brewed an Imperial Stout on New Years Day, this year its a more free range of beer styles but people are pushing the boundaries a little with some funky yeast etc
The name for this beer comes from http://en.wikipedia.org/wiki/Army_of_Darkness quite the classic.
I’m making a big beer, 10% ABV with Amarillo & Delta Hops, I’d like to brew a beer that will evolve and change over a couple of years (hopefully it will last that long!) something with at least a hint of what my Imperial Amarillo Wheat had after 18 months.
Once I’ve fermented mine with US-05 I’ll be bottling half-ish and then using Brettanomyces Bruxellensis in a secondary fermenter.

Fermentables:
Lager Malt 2.5 EBC – 63.9%
Wheat Malt – 9.9%
Vienna Malt – 8.9%
Munich Type I (Weyermann) – 8.9%
Flaked Oats – 5%
Cara Vienna (Dingemans) – 3.5%

Hops:
Sticklebract Pellet – 11.7 % @ 60 mins – 90g
Chinook Pellet – 12.9 % @ 60 mins – 18g
Summit Pellet – 15.8 % @ 30 mins – 27g
Amarillo Whole – 10 % @ 15 mins – 50g
Delta Whole – 6.5 % @ 15 mins – 50g
Amarillo Whole – 10 % @ 0 mins – 50g – (80c steep for 20-30mins)
Delta Whole – 6.5 % @ 0 mins – 50g – (80c steep for 20-30mins)

Final Volume: 23 Litres
Original Gravity: 1.100
Final Gravity: 1.024
Alcohol Content: 10.2% ABV
Total Liquor: 37.5 Litres
Mash Liquor: 25.9 Litres
Mash Efficiency: 70 % – Reduced a bit from normal
Bitterness: 200 EBU
Colour: 19 EBC
Mash: 65°c for 120mins
Yeast: Safale US-05 x 3 packs
Liquor: GW Calc ‘Dry Pale Ale’

A very full fermenter full of malts, about 12kg in all:
Image
Hot liquor at 82°c to pre heat mash tun, let cool to 72°c before mashing in, Temp-Controller construction is here:
Image
The overview of my three tier home brewery, gravity fed system with Hot water from the House feed to fill the HLT at 50-60°c:
Image
These NZ Sticklebract smell great, big pungent citrus character, bit of a shame they are just the bittering:
Image
New Year Resolution is to brew my way thru some of this lot!:
Image
After 2 hour mash I’m recirculating the wort for clarity, tastes good:
Image
About OG 1090 give or take, a temperature corrected Hydrometer test showed 1083 a more reasonable figure, the mash was actually pretty text-book and the recirculation must have helped:
Image
Boiling down the wort in the kitchen too so as to speed things along, I did this with some of the first sparge and again with the second sparged wort:
Image
Amarillo and Delta 80°c steep hops:
Image
Almost 1110 off the scale, this is going to be a fun liquorback:
Image
Finally after a mega dribble transfer I have pitched 3 packs of yeast!:
Image

Everything was going sooo well until I got about 10 Litres transferred into the FV when it ground to a halt (Dribble) and I started to try and find a way to make it speed up so cleaned a Solar Pump and pipework and tried pumping it… sadly I just got the same dribble but through a pump, left it to it and came back about 9pm to find about 20 Litres in the FV. I was over my OG so I liquored back to just over my target and gained an extra couple of litres, there must have still been 4-5 Litres left in the soggy hops in the copper, If it had drained properly I’d got that extra out and would have split the batch into another FV and left the Brett to do a full primary ferment.

My Method for brewing this 10% beer:
This is how I have done my Barley Wine and Abyss Imperial Stout, Over-sparge by 10 Litres or so and boil it down in a few pans before adding all back to the copper and boiling down until I reach the theoretical pre-boil Volume, then add the 60min bittering hops and so on until the end of a boil. The Mash and Sparges were; Mash with hot liquor at 73°c for 120minutes (65c Mash); recirculate entire mash via solar pump for approx 20mins; drain Mash completely avoiding malt particles at the end; Sparge with 13.4L Hot Liquor at 78°c recirculate and Run-off; Boil down in pans; Second 10L Sparge Recirculated and Run off with a further boiling down.
As I was saying above I was actually finishing the boil with a good few litres more in the copper and was hoping for extra in the FV… oh well!

I may have to look at improving my Mesh Hop-Stopper for brewing these bigger beers that include some Pellet Hops.

Twitter HashTag #NYDBrewAthon

This years brewers were:
Here is Barney’s on JBK – Monks Slipper
Here is Macca’s on JBK – Cliffhanger Oatmeal Stout
Here is Lugsy’s on JBK – Pseudo-Lambic (Lugsy started early as he’d learned from last year!)
Here is Leedsbrew’s Prep Blog and later Update
Here is Quadrangularus’Raspberry Sour Brown Ale

More as and when the brewers post up their Brewdays

*12th Jan ’13 – Gravity at 1019 so 10.9% ABV, dry hopped with pellets:
Nelson Sauvin – 29g
Motueka – 29g
Cascade – 29g
I decided not to go down the Amarillo whole hop route as they would soak up too much beer and I’ll be splitting some of the beer off into a Demijohn or small FV bucket to Brett so don’t want to loose too much volume.

*Bottled 20th Jan ’13 – with 65g White Sugar, dropped the lot into a Bottling bucket with primings then bottled half-ish in 330ml bottles then put the rest in an Oxfam bucket and pitched the Brett.
Syphoned thru a Teaball to guard against getting pellet debris in the bottles, the chill down to 8°c in the fridge had made it pretty clear anyway:
Syphon Teaball
Brettanomyces Bruxellensis added to about 8L in Oxfam bucket:
Brettsnomyces Brux added to about 8L in Oxfam bucket
Got about 32 bottles, tasting pretty good with a fair amount of residual sweetness which should fade in bottle as it conditions and matures:
Bottled ag#92

*2nd Feb ’13 – Brett’d beer has dropped 2 points to 1017 from 1019, very slight speckled surface, think it needs more brett! Tastes just slightly different to what I’d expect from un-brett’d.

*2nd Feb ’13 – Had a taster bottle with Dave last night, has loads of residual sweetness which I hope will diminish as it matures, could have done with maturing in bulk then Dry hopping and bottling some weeks/months later.

*9th Feb ’13 – Just added a fresh tube of Whitelabs WLP650 as I was expecting more to be happening and wondering if the OG / Alcohol content is screwing the Brett Brux over.

*25th Feb ’13 – Gravity @ 1017 which hasn’t budged in the last 23 days! Tastes just on the edge of bretty-sour but very subtle. I’m fairly sure the High Alcohol has killed the Brett.

*31st Mar ’13 – Gravity @ 1015 so its creeping slowly and is now showing a more Bretty sour, it could be some time before this is finished!

*11th Aug ’13 – The Brett’d batch gravity is 1014, I doubt it is going to go any further, tastes different maybe not what I’d hoped for…

I shall be abstaining from brewdays for a while, normal service will resume once I’ve got through some of the beer!

This weekend I bottled my last two brews, Ta Moko II & Chinook Blonde and I’m still warm conditioning my Double IPA HopZilla IPA… so thats *6 crates of beer sat in our office/study/room/thing 🙂 *Crates hold 20 bottles of 500ml or 24 x 330ml

Garage beer stocks are pretty high with lots more full crates stashed in there too… the Temperature control on the fermentation fridge has been turned off and the HLT is empty! (Hop Freezer is Full!)

There are Whitelabs yeasts in the fridge to brew with once I get going again:

  • Brett WLP650 (Something with Flaked Oats and Wheat malt, lots of Cara/Crystal malts)
  • Belgian Blend (Might get some more Date Molasses)
  • Hefeweizen (I’ll go the whole decoction hog but hop with Amarillo & Nelson Sauvin +dry)
  • Kólsch (Ideas for an IPA, a Malty Smoke beer, and maybe a Red Rye)
  • San Diego Super (I’m sure I’ll have plenty of options for this one… US Brown re-brew with tweaks?)
  • Edinburgh Ale (Something British, might do a Fuggle IPA and a Coniston Bluebird-esqe bitter)

Malts are pretty plentiful too:

Pale Malt, Lager Malt, Caramalt, Choc Malt, Choc Wheat, Crystal, Extra Dark Crystal, Flaked Barley, Flaked Oats, Pale Crystal, Carahell, Roast Barley, Carapils, Cara-munich Type III, Carafa Special III, Special B, CaraAmber, Medium Peat Smoked, Roasted Wheat, Black Malt, Brown Malt, Roasted Rye, Crystal Rye, Cara Vienna, Pale Oat Malt, Melanoidin, Flaked Wheat, Muinch Type I, Munich Type II, Amber Malt, Rye Malt, Rauch Malt, Flaked Maize.

Bulging Hop Freezer:

UK Cascade, Columbus, Challenger, Fuggle, Bobek, Goldings, Magnum, Summit, Willamette, Apollo, Chinook, Hersbrucker, Simcoe, NZ Cascade, Tettnang, Green Bullet, Aramis, Junga, Mount Hood, Spalter Select, Marynka, Cluster, Amarillo, Lubelski, Centennial, Riwaka, Citra, Northern Brewer, Galaxy, Super Alpha, Summer, Stella, NZ Hallertau Aroma, Pacific Gem, Warrior, Delta, Topaz, Nelson Sauvin, Pacific Jade, Pacifica, Wai-iti, Kohatu, Wakatu, Motueka, East Kent Golding, Sticklebract.

I wonder how long I can go without firing up the HLT? 🙂 AG#88 will be a….????

Ta Moko II – A re-brew with minor tweaks for hop Alphas and added 5% Flaked Oats. The last version of this beer is here. If this beer is as good as the last brew it won’t last long and is as good a reason as any to think about investing in a bigger copper boiler / 50 Litre Keg-boiler 😉

Fermentables:
Lager Malt – 75%
Carapils (Weyermann) – 10%
Wheat Malt – 8%
Flaked Oats – 5%
Cara Munich Type III (Weyermann) – 2%

Hops:
Pacific Gem – 17 % @ 60 mins – 15g
Pacific Gem – 17 % @ 15 mins – 10g
Nelson Sauvin – 12.1 % @ 10 mins – 41g
Nelson Sauvin – 12.1 % @ 0 mins – 51g

Final Volume: 23 Litres
Original Gravity: 1.040
Final Gravity: 1.010
Alcohol Content: 3.9% ABV
Total Liquor: 31.5 Litres
Mash Liquor: 10.1 Litres
Mash Efficiency: 75 %
Bitterness: 52 EBU
Colour: 8 EBC
Mash: 60-90mins @ 67°c
Boil: 60mins
Liquor Treatment: as previous Ta Moko Brew / GW Calc ‘General Purpose’.
Yeast: Safale US-05

Malts are, Lager, Carapils, Wheat, CaraMunich III, and Flaked Oats, I put the Gypsum in the mash and the other salts went in the boil:
Image
Hops from @TheMaltMiller:
Image
Fairly reserved on the hopping, all but 15g of FWH are in the last 15mins of the boil:
Image
Filling the Mash Tun with hot Liquor, I use about 83°c and leave it to pre-heat the tun allowing it to cool down to my Strike Temperature before mashing in, I mashed in at 74°c:
Image
Full copper heating with the FWH:
Image
Half a protafloc tablet into a 23L brew @ 5mins left:
Image
The 50g of 80°c Steep hops:
Image
I liquored back 1.6 litres to get OG 1040 and near as damn it to my required volume:
Image
This is FV1 full of Ta Moko wort with US-05 dry sprinkled, I may skim and re-pitch for next weekends Chinook Blonde Brew:
Image

Mashed in just after 8am and finished before 2pm with a brief trip to town to get a strip-light for the kitchen, 2nd breakfast was had in-between batch sparges and lunch while running wort to the FV 🙂

*Bottled 18th Aug ’12 – with 80g of white sugar

Ring of Fire – This is a brew using two New Zealand hops I’ve never tried, ‘Pacifica’ and ‘Pacific Jade’ the latter smells like a cross between Citra & Nelson Sauvin to me…
The name is taken from the the hops / Pacific Ocean / volcanic “Ring of Fire”, part of which passes through New Zealand giving them Geothermal activity and Earthquakes.
A fairly sensible malt bill with German Munich Malt for some maltiness and Cara-Pils & Cara-Belge for some body & Sweetness, I’m going fairly restrained on the early bittering and quite light on the 5 minute hops as I want to leave the Dry Hopping to do the talking which will be the remainder of the two 100g packs of hops, should be around 50g of each.

Fermentables:
Lager Malt – 75%
Munich Malt I (Weyermann) – 10%
Carapils (Weyermann) – 5%
Flaked Oats – 5%
Cara Belge (Weyermann) – 5%

Hops:
NZ Pacifica – 6.1 % @ 60 mins – 10g (FWH)
Pacific Jade – 15.1 % @ 60 mins – 10g (FWH)
NZ Pacifica – 6.1 % @ 30 mins – 10g
Pacific Jade – 15.1 % @ 30 mins – 10g
Pacific Jade – 15.1 % @ 5 mins – 30g (with 20min Steep)
NZ Pacifica – 6.1 % @ 5 mins – 30g (with 20min Steep)

Dry Hops: (These will be added near the end of fermentation before cooling)
Pacific Jade – 50g
NZ Pacifica – 50g

Final Volume: 23 Litres
Original Gravity: 1.049 – I got 1053 so liquored-back 1.7 Litres
Final Gravity: 1.012
Alcohol Content: 4.8% ABV
Total Liquor: 32.5 Litres
Mash Liquor: 12.5 Litres
Mash Efficiency: 75 % – I actually hit over 83%
Bitterness: 50 EBU (I still have the BeerEngine software set to 25% Hop Utilisation)
Colour: 9 EBC
Mash: 67°c for 60-90mins
Yeast: Safale us-05
Liquor Treatment: General setting via www.thehomebrewforum.co.uk/water.php

Malts & Temp:
Image
First Wort Hops and liquor Salts for the boil:
Image
The 5 min Hops & 1 Protafloc tablet:
Image
Recirculating about 6 litres to get rid of the Turbid wort before running to the copper:
Image
5min Hops going in:
Image
Break material forming during cooling:
Image
OG:1053, I liquored back to correct 1049 gravity in FV:
Image
Pretty straight forward brewday, bleached a couple of crates of bottles thoroughly in amongst brewing to prepare to bottle AG#82 on Tuesday-ish 🙂

Liquoring back:
Its pretty easy to use a Smart Phone based app to help you calculate your liquoring back volume, but probably just as easy to use a calculator, it goes a like this.

Wort OG x Volume = (Litre Degrees)
Litre Degrees / Target OG = Volume to make up to with Liquor-Back
(We drop the leading 10 from the 1053 giving us 53)

Its important to read your Hydrometer/Saccharometer correctly and adjusting for sample temperature and know an accurate volume for the wort that you’ve collected.

*Bottled 15th Jul ’12 – with 90g sugar to 20.5 Litres of beer, tastes pretty green / grassy / zingy / catty, will probably take 2 or 3 weeks to settle down in the bottle.

*18th Jul ’12 – Cheeky taster, Orange zest and smooth, slight musky edge… bet would work well as an IPA or just a lovely refreshing summer pint.

Nit Wit – Something Decocting going on! The plan was to brew a Belgian style Wit, I’m taking some reference from ‘Radical Brews’ & ‘Brewing Classic Styles’ books along with Leedsbrew‘s brewday. This is the first time I’ve done a Decoction Mash and I started out using Beer Alchemy on the iPhone then later Switched to Brewzor on the old HTC Android, though the recipe was designed in good old BeerEngine.
I decided on the morning of the brewday to go with all Crystal Hops rather than my initial idea of blending them with Green Bullet (which I find like a very strong Styrian / Bobek)… however I had just slightly less Crystal than I wanted so added the 6g of Citra in the Flameout steep for that little touch of, what I hope will be, a complimentary herbal edge.

Fermentables:
Lager Malt – 50%
Flaked Wheat – 43%
Flaked Oats – 5%
Cara Vienna (Dingemans) – 2%

Hops:
Crystal – 4.9 % @ 60 mins – 12g (FWH)
Crystal – 4.9 % @ 30 mins – 30g
Crystal – 4.9 % @ 0 mins – 6g (30min Steep)
Citra – 13.8 % @ 0 mins – 6g (30min Steep)

Other additions:
Orange Zest – 27g
Lemon Zest – 5g
Orange Juice – 300ml from the 3 Oranges
Crushed Coriander – 11g
Camomile – 3g

Final Volume: 23 Litres
Original Gravity: 1.044
Final Gravity: 1.010
Alcohol Content: 4.4% ABV
Total Liquor: 33.8 Litres
Mash Liquor: 13.7 Litres
Mash Efficiency: 65 % (I lowered this as I thought the mash may struggle with all the Flaked Adjuncts)
Bitterness: 17 EBU (BeerEngine Hop Utilisation set to 25%, which looks to compare with Rager setting in Beer Alchemy)
Colour: 3 EBC

The plan was to do a single decoction with the initial mash temp being 50°c, I mashed in and hit 51°c and left to rest for 15mins, then calculated the decoction using Beer Alchemy to raise the temperature to 68°c, so I brought the 5.92L of Mash to the boil then added back to the main mash. This increased the mash temp to 61°c which was nowhere near so I let rest for a further 15mins and did it again but this time using Brewzor… this is where i managed to punch the wrong numbers into the phone and only boiled up 2.9L which when added back to the main mash took me to 63°c, so again I rested the mash for 15mins! So now I’m onto the third decoction, and punched the right figures into the phone and boiled up my final 4.3L of the mash and added it back to the main mash to attain my 68°c that the first decoction should have given me.
Something obviously went a drift somewhere, be it software or operator error, anyway… I enjoyed myself 🙂
Now I’ve dipped my toe in the decoction,  so to speak, I’m eager to use my Whitelabs Hefeweizen yeast and do a German Wheat beer with a shed load of Decoction steps!

Flaked goods and Cara Vienna, I added 2.1g Gypsum to the mash which started at 8.25am:
Image
Doing a Decoction, I added the first back to the main mash at 9.15am:
Image
Iodine test for Starch, this was after I’d been out shopping for oranges and it was 12.10pm with the last Decoction being added back to the main mash at 10.10am, I got a pretty mental 86% efficiency:
Image
Second sparge running off into the copper with First Wort Hops, I used a Stout profile in THBF Liquor treatment calculator and added 14.6g Calcium Chloride / 2.3g Magnesium Sulphate / 3g Salt (Sodium Chloride) to the copper with the hops that I’m going to give it a further slick oily mouth-feel to the finished beer, this is something I will have to report back on later:
Image
I have a massive crack… in my Mash! It was amazing the way the decoctions turned the mash from a gloopy gelatinous mess into something that ran freely and looked like wort!:
Image
Crystal hops for 30min addition:
Image
Orange & Lemon Zest with the juice of 3 oranges, I appreciate that the Orange Juice may cause a pectin haze… Good:
Image
Crushed Coriander seeds with a couple of teabags-worth of Camomile:
Image
Looks like its going to be a nice pale colour, had to do a load of Liquoring back to hit correct OG, I ended up with 29 litres  so had to split the wort between my regular FV and a smaller new one I’d just got:
Image
So with all that extra wort I put some in an Oxfam bucket and pitched T-58 into that to see what the differences are, the Oxfam buckets are really thick strong plastic and mega cheap too:
Image

It was a pretty long brewday but I actually found it all rather entertaining, even though the Decoctions didn’t have the desired affect to begin with, Whitelabs WLP400 Belgian Wit Yeast pitched from an 800ml Starter that I’d chilled and poured most of the beer off the top.
Oh! and i didn’t realise until later that this was my 80th All Grain Brewday 🙂

*30th may ’12 – T-58 batch has finished at 1013, so a nice amount of body left. The WLP400 has stopped at 1035! Meh! Just given it a good thrashing with a sanitised paddle, fingers crossed all the yeast that was sat on top will get back to work and stop slacking!

*Further days up-to 1st Jun ’12 – it seems this yeast requires regular attention, the yeast seems to ferment and then rise to the top then stall, so two days running I have roused the fermenter and each day I have come back to find the yeast trying to escape the bucket with a subsequent gravity drop.

*4th Jun ’12 – Gravity at 1008 now after some further rousing, fingers crossed its finished there.

*Bottled 10th Jun ’12 primed in bulk for 2.5 Volumes of co2

Mild Ale II – The second of my brews for the www.gbhomebrew.co.uk competition, a Mild Ale based on my last Mild so slightly tweaked but hopping remains very similar. It wasn’t intended to have Pale Crystal in it but I ran out of Crystal Malt so had to substitute some.

Malts:
Pale Malt – 70%
Munich Malt – 10%
Crystal Malt – 6%
Flaked Oats – 6%
Crystal Malt, Pale – 4%
Chocolate Malt – 2%
Chocolate Wheat Malt – 2%

Hops:
Golding 21g – 4.2% @60mins (FWH)
Fuggle 21g – 3.8% @60mins (FWH)
Golding 13g – 4.1% @10mins
Fuggle 13g – 3.8% @10mins

Final Volume: 23 Litres
Original Gravity: 1.038
Final Gravity: 1.010
Alcohol Content: 3.6% ABV
Bitterness: 23 EBU
Colour: 67 EBC
Yeast: Windsor
Mash: 60-90mins @ 69c
Boil: 60mins
Liquor: Treated to Mild Profile using GW Calc

Malts, Temp and Liquor treatments:
Image
The Mash at 69c:
Image
Hops weighed, small common salt addition to go in the Copper and Protafloc tablet for last 5 mins:
Image
First run-off onto First Wort Hops:
Image
In go the 10 minute hops:
Image
Windsor yeast rehydrated as the packet suggests, using 2 packets as I hear things about Windsor yeast stalling:
Image
Aerated and in the FV:
Image
I forgot to take a OG shot, it was 1040 with the hydrometer, Refractometer said 1038 so near enough either way.
I had 86.5% Mash Efficiency and hit my 69c mash temp.

*18th Sep ’11 – Word to the wise… Forget Windsor, it stops really high and in theory would leave me with a 2.8-3% Beer…
Soo….
I’ve rehydrated 26g of Nottingham yeast, added it and 90g of dissolved Demerara Sugar to the FV and given it a rather good stir… Fingers crossed for a few more points!

*Cornie 22nd Sep ’11 with Allkleer finings, 4 500ml bottles primed with 1/2 Tsp sugar, FG 1018 so about 2.8% beer! First & last use of Windsor yeast I think! When brewed again I’ll use my usual us-05 yeast.


Vital Stats

  • 211,578 hits

Books worth a read

Suggested Sites

Historical Data

Podcast & Feeds

QR Code

qrcode

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 1,700 other followers