The Cheshire Brewhouse, BIPA Brewday

Posted by: pdtnc on: October 12, 2013

In: Brewing
Leave a Comment

I went down to see Shane at www.cheshirebrewhouse.co.uk yesterday to do a collaboration brew.
The brew was to be a Black IPA made with, among other things, Weyermann Sinamar Carafa Extract and Warrior hops, we stuck to a simple malt bill with Pale malt and a little Munich and adding sugar at the end of boil to take us into the 6.7ABV area.

The dry goods in the Mash Tun, Shane Underlets to mash in, this was a first for me as I’ve always used a Hydrator so the malt and liquor are already mixing as they hit the tun. For those that don’t know, Shane built all his brewkit from second-hand vessels and insulated and clad them himself:

The FV’s:

Shane paddling hard at the mash:

All the FV’s have a name, this is the temp controller belonging to Gertrude:

Underback and pump:

Sparge arm spinning:

Shane rubbing up the 10minute hops:

This is his take on a hop filter (Used to be Hop-back), the copper has a big 4 inch butterfly valve on the base of the cone so the spent hops in the copper are simply poked down thru the outlet to clean out:

This was either the late sugar addition or the late Steep hops going in:

Some beery treasure I brought home with me 🙂

We had some fun and games with a stuck mash and the copper was on a go-slow at getting to the boil, it was hopped with first Wort Warrior hops then 10 mins before the end of boil more Warrior & US-Magnum, finally finished with a late 85c steep of Simcoe, Chinook and Experimental 366. The Sinamar was added while recirculating and the colour checked…. It was black 😉
The wort was tasting great with little to no roast character, this is what we were aiming for with the Sinamar… so look out for “Stormy Point” Dark and Moody IPA from @shaneswindells you might see @pdtnc or @SaltaireBrewAde on the bottle labels & Pump Clips etc