Probably Due To Network Congestion

Posts Tagged ‘wishbonebrewery

2013 Homegrown Hops – A British hopped pale ale, Yorkshire Homegrown hops from last years crop, I used the alpha acids that were last used in BeerEngine for the calculations but who knows what the bitterness will be like.

Fermentables:
Pale Malt – 89%
Carapils (Weyermann) – 11%

Hops:
Challenger – 60 mins – 9g
Fuggle – 60 mins – 9g
Challenger – 5 mins – 145g
Fuggle – 5 mins – 120g

Dry Hops:
Whitbread Golding 200g for 2-4 days

Final Volume: 25 Litres
Original Gravity: 1.053
Final Gravity: 1.013
Alcohol Content: 5.1% ABV
Mash Efficiency: 75 %
Bitterness: 42 EBU
Colour: 9 EBC
Mash: 60mins @ 69°c
Yeast: Safale us-05

Malts n Salts:
Image
Lots of Hops:
Image
First sparge wort going onto the FWH:
Image
Quite a Hop charge at 5mins left to boil:
Image

I’d liquored back with 2L during the boil as my volume in the copper was looking low, this later meant that I actually missed hitting my target OG of 1053 and got 1051. Weirdly the wort smells as if its been Wet-hopped even after drying and vac-packing my homegrown hops last September and kept in the freezer until now.

You’ll have noticed I’ve not been around much as my Wishbone Brewery project isn’t leaving me much time to think about anything else, all being well in the next couple of weeks I’ll have signed the lease on premises and will be getting the builder in to do the drains by the end of September, fingers crossed I’ll be brewing for Christmas.

*28th Aug ’14 – Gravity at 1013.5 so dry hopped with 200g homegrown WGV, the beer was tasting good as it was so this may have been a mistake! Stirring them in has probably just oxidized the beer!
AG#125 - homegrown hops, 200g of WGV going in the FV! Beer tasting good already.

*Bottled 6th Sep ’14 – with 66g of white sugar in just over 20L so the hops and yeast accounted for about 5L of losses! Tasting pretty good, big orangy taste from the dry hops.


Vital Stats

  • 212,052 hits

Books worth a read

Suggested Sites

Historical Data

Podcast & Feeds

QR Code

qrcode

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 1,700 other followers