Probably Due To Network Congestion

Posts Tagged ‘admiral

Imperial Smoked Porter – This is serving a couple of purposes; First is a Trial run of a big beer in my newly finished False bottom Mash tun; Second is using up some odd bags of malt and some older hops I had in the freezer and some other part bags of hops.
I’m not expecting the stated bitterness from my hops – http://www.wellhopped.co.uk/Product.htm so I’m going semi-worst case scenario and adjusting AA for age and storage.

Fermentables:
Pale Malt – 70.2%
Caramalt – 8.2%
Peat Smoked Malt, medium – 4.2%
Amber Malt – 3.9%
Oat Malt – 3.5%
Chocolate Malt, Pale – 2.3%
Crystal Wheat Malt – 2.4%
Chocolate Wheat Malt – 1.8%
Flaked Wheat – 1.6%
Chocolate Malt – 1.5%
Flaked Rye 0 EBC – 0.5%

Hops:
Bobek – 3.7 % @ 75 mins – 124g (FWH)
Admiral – 12 % @ 75 mins – 19g (FWH)
Herkules – 15.8 % @ 75 mins – 35g (FWH)
Brewers Gold – 9.1 % @ 10 mins – 68g
Cascade – 5.5 % @ 0 mins – 29g (Flame-out Steep for 20mins)
Saaz – 3.8 % @ 0 mins – 33g (Flame-out Steep for 20mins)
Simcoe – 12.9 % @ 0 mins – 20g (Flame-out Steep for 20mins)

Final Volume: 23 Litres
Original Gravity: 1.076
Final Gravity: 1.021
Alcohol Content: 7.2% ABV
Total Liquor: 36.8 Litres
Mash Liquor: 20.5 Litres
Mash Efficiency: 70 % (I collected 32L @ 1055 so hit efficiency but had too much liquor)
Bitterness: 121 EBU (I’m not expecting this as the bittering hops were fairly old so subtracting 30% from the AA will be more like 90EBU)
Colour: 140 EBC
Mashed for 90mins @ 66c
Boil for 75mins
Liquor treatment as per GW calc for General Purpose

Bigger bucket than normal with 8.5kg of malts:
Image
New mash tun full of hot liquor:
Image
Initial Mash a little high, cooled with cold liquor to 66c:
Image
Tidy brewsheet (version 3, other two are scibbly works in progress) along with late hops:
Image
Quite a heap of first Wort Hops in the copper along with the common salt addition:
Image
What lies beneath, mash leftovers under the mash screen:
Image
10 min hops going in:
Image
Break material clumping in the copper:
Image
Looks near as damn it to me (Showing 72 +2 divisions in the meniscus = 1076), not bad for a first outing of the new Mash Tun:
Image

I had 3.7 Litres in the new mash tun to just cover the false bottom, the first sparge top-up was a little over 3 litres so I didn’t top-up and subtracted the difference from the Second batch sparge. This was to take into account the liquor under the screen, I ended up with 32 Litres in the copper which i thought too much but by the end of the 75min boil I was at my predicted gravity so I must have worked things out right!

Thoughts on the False bottom:
The mash ran off very well and after a few jugs of recirculating it was also very clear.
After stirring the second sparge and running off I came back to the mash tun to find it had run a load of malt particles into the copper as the last of the mash drained out. I’ll have to keep an eye on it next time to stop this just as it starts to show bits coming through, or have a go a Fly sparging so as to not actually disturb the Mash bed and hopefully limit the amount of malt particles coming through.
New cleaning game, poking bits of malt out of the perforated stainless!

16th May ’11
The usual, Stout+S-04 ferment πŸ™‚ :
Image

*Bottled 25th May ’11 with 71g of White sugar and a tiny sprinkle of Nottingham yeast into each bottle as a bit of a safety precaution as it had dropped very bright. Finished at 1016-1018 so about 7.7% ABV.

*4th JUne ’11 Taster bottle, tasting good the Peat Smoked malt works well with the Strength of this beer, Bitterness just right so I’m glad I adjusted the hop Alpha acids for my older hops.

Advertisements

Hmm, I think I need to do some serious brewing πŸ˜‰

Úber Brewing Nerd!

Admiral
Ahtanum
Amarillo
Bobek
Bobek
Bramling Cross
Brewers Gold
Cascade
Centennial
Columbus
East Kent Golding
First Gold
Fuggle
Golding
Green Bullet
Herkules
Hersbrucker
Home grown Fuggle
Liberty
Mittlefruh
Motueka
Nelson Sauvin
Pacific Gem
Pilot
Pioneer
Progress
Rakau
Riwaka
Saaz
Simcoe
Soverign
Sticklebract
Target
WGV
Williamette

That works out at 2.79kg across 35 hops!

Need something distinctly Hoppy & Pale between 4 – 5.5%
….Suggestions???

Otter Dark Stout MKII – This is basically my first Extract own recipe which I’m now going to do as an All Grain :) It tasted bloody fantastic as an extract brewed with Safale s-04, but this time I’m thinking of using Whitelabs Irish Ale yeast WLP004 http://www.whitelabs.com/beer/strains_wlp004.html
This is mkII because I’m rationalising my hops a bit instead of using a combination of EKG’s / Fuggles as my bittering additions I’m going to use Admiral and save a few grams on the Flavour/Aroma additions.
For Water Treatment I’m thinking I’ll follow the Stout profile in the GW Calc, though will add a Tsp of Gypsum anyway.
I wonder if a stout mash be naturally more or less acidic??? (90min mash)

Fermentables:
Maris Otter 3800g
Roasted Barley 355g
Chocolate Malt, Pale 355g (Thanks to Paul @ http://www.barleybottom.com for the excellent service, You’ll be getting some of this when its ready)
Crystal Malt 355g
Crystal Wheat Malt 190g

Hops:
Admiral 20g (FWH) 60mins
Fuggle 20g @ 15mins
East Kent Golding 20g @ 15mins

Final Volume: 23 Litres
Original Gravity: 1.048
Final Gravity: 1.016
Alcohol Content: 4.1% ABV
Total Liquor: 33.4 Litres
Mash Liquor: 12.6 Litres
Mash Efficiency: 75 %
Bitterness: 36 EBU
Colour: 232 EBC

Here’s the pictures so far…..
The Grain bill, Maris otter, roasted barley, pale chocolate malt, crystal wheat malt, crystal malt:
Image
Mash Temp, near as damn it 66 C, finished at 64 C Hmm!:
Image
Mash pH, think this looks about right:
Image
First run off, tastes pretty damn good:
Image
Mash Tun and first batch sparge, it proceeded to stick after a good start, had to re-suspend and blow up the pipe, I wonder if it is the Crystal Wheat malt thats causing this? My last 23L batch in this tun worked perfectly with no sticking:
Image
I managed to not prepare quite enough water this time too, nice! So I’m generally arsing about boiling kettles full of bottled water to top up my second batch sparge, I’m not far short but enough to be annoying :D
The Mash is doing a slow trickle! How can it work perfectly one time and then be a b’stard the next?! *Bigger saw cuts maybe, they are all Junior Hacksaw cuts at present*
More to follow… S L O W L Y ! :roll: #-o
Admiral FWH going in with first batch spargings to warm up, the second batch sparge is running off better than the first, thankfully!!!:
Image
Cooler in and 15 minute hops (Fuggles and EKGs):
Image
I had 10g of Fuggles scraps left in the bag so these have gone in as a Zero minutes 10 min steep:
Image
Cold Break and (Floaters) Hop seeds:
Image
Hit my Target OG of 1048, happy happy joy joy:
Image
I’ve decided I’m going to split this batch and use the Whitelabs Irish & s-04 yeasts.
Hop seed catcher and aeration:
Image
Much needed refreshment, ‘Fuggles Bitter’:
Image
Pitched Vial @ 22 C Whitelabs Irish Ale yeast WLP004 in FV1:
Image
Dry Sprinkled @ 22 C Safale s-04 in FV3:
Image

All done, Just a bit of tiding up to do :) Net curtain material, to act as a Mashing bag, ordered on ebay! And I’ll be making my Mash Tun Manifold’s slots wider with a regular Hacksaw rather than their present Junior hacksaw cuts.

As of about now 18.00 20/09/09, we have fermentation with both batches :)
Whitelabs WLP004 Irish Ale:
Image
Safale s-04:
Image

**Bottled 28/09/09 with 48g white sugar, both yeast batches tasting about the same.


Vital Stats

  • 214,268 hits

Books worth a read

Suggested Sites

Historical Data

Podcast & Feeds

QR Code

qrcode

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 1,701 other followers

Advertisements