Posts Tagged ‘pale malt’
AG#99 – Boomstick
Posted on: April 20, 2013
- In: Brewing
- 3 Comments
BoomStick – I’m brewing this for NCB member Paul Bromley who runs a back-garden charity event, he asked me if I’d brew something pale for it, so here it is, its an evolution from my Chinook Blonde recipe, using some of the same hops (but more of them) and adding some Weyermann Munich Type I, and mashing at 69°c, fermenting with Safale us-05.
This time the name again comes from a line Ash says in Army of Darkness “This… is my Boomstick!”
Alright you Primitive Screwheads, listen up! You see this? This… is my boomstick! The twelve-gauge double-barreled Remington. S-Mart’s top of the line. You can find this in the sporting goods department. That’s right, this sweet baby was made in Grand Rapids, Michigan. Retails for about a hundred and nine, ninety five. It’s got a walnut stock, cobalt blue steel, and a hair trigger. That’s right. Shop smart. Shop S-Mart. You got that?
Fermentables:
Pale Malt – 70%
Munich Type I (Weyermann) – 20%
Flaked Oats – 5%
Carapils (Weyermann) – 5%
Hops:
UK Cascade – 5.7 % @ 60 mins – 21g (FWH)
UK Cascade – 5.7 % @ 30 mins – 21g
Chinook – 12.5 % @ 10 mins – 21g
Cascade – 7.9 % @ 10 mins – 21g
Chinook – 12.5 % @ 0 mins – 49g (94c Steep for 25mins)
Cascade – 7.9 % @ 0 mins – 49g (94c Steep for 25mins)
Final Volume: 25 Litres
Original Gravity: 1.037
Final Gravity: 1.009
Alcohol Content: 3.7% ABV
Mash Efficiency: 75 %
Bitterness: 33 EBU
Colour: 9 EBC
Mash: 69°c for 70mins
Boil: 60mins
The malts, all pretty pale:
The hops:
Second batch sparge liquor going in at 78°c:
In go the Cascade & Chinook for the flameout steep:
I decided to rehydrate my yeast today to try and get things underway faster, I want a speedy ferment with time to put this beer in cask to condition before Paul’s event:
The money shot, I got 1044 and liquored back to 1037 with 4 litres giving me a total volume of 25.7 Litres, a goodly amount for filling a plastic pin cask:
No messing, done and dusted.
*25th Apr ’13 – Steady gravity reached, exactly as predicted FG, chilling down before casking this beer.
*Casked 27th Apr ’13 – with 20g white sugar and Allkleer finings, got a few 500ml bottles from it too which I give 3/4 Tsp white sugar each.
I’m going to give the cask a couple of days of warm then chill it down to cellar temps.
*1st May ’13 – Had a cheeky bottle of this, and its bloody good, plenty of juicy hops with a nice balance between the Cascade & Chinook, Chinook not overpowering just nice 
AG#88 – Casapollocade IPA
Posted on: September 30, 2012
- In: Brewing
- 4 Comments
Casapollocade IPA – As the name sort of says, this beer uses Cascade & Apollo hops in abundance for the late steep though bittering comes from two very healthy doses of Willamette
This beer is not shy and promises to be brash on the bitterness with floral, “dank” and piney notes, the Apollo are pretty pungent and might be better suited rolled in some Rizlas than soaked in wort!
Its been a little while since I brewed so I decided to make this a bit of a Pancake-day, used up all my Pale, Lager, Weyermann Munich Type I, and Oat malts… out with the old and in with the new etc etc….:)
Fermentables:
Pale Malt – 45.6%
Lager Malt – 18.1%
Oat Malt – 15.2%
Munich Type I (Weyermann) – 14.6%
Caramalt – 4.6%
Amber Malt – 1.8%
Hops:
Willamette – 6.4 % @ 60 mins – 75g – (First Wort Hop)
Willamette – 6.4 % @ 30 mins – 75g
Cascade – 7.9 % @ 0 mins – 100g – (20-30min Steep)
Apollo – 19.5 % @ 0 mins – 100g – (20-30min Steep)
Final Volume: 23 Litres
Original Gravity: 1.062
Final Gravity: 1.015
Alcohol Content: 6.2% ABV
Total Liquor: 32.9 Litres
Mash Liquor: 15.8 Litres
Mash Efficiency: 75 %
Bitterness: 84 EBU
Colour: 18 EBC
Mash: over 90mins @67c
Boil: 60mins
Yeast: Safale US-05
Liquor Treatment: GW Calc Dry Pale Ale
The Malts:
The Mash Temp, aimed for and hit my temp:
Liquor Salts & 75g of Willamette FWH:
Lots and lots of Hops:
First Sparge of the two batches:
Do you think 350g for a 23L brew-length is too much?:
Flameout Steep hops, 200g of them:
Chilled, nothing has settled out ‘cos there is a shed load of hops in there! Thinking logically this is a heck of a reason to use pellet hops for big heavily hopped beers as the retained wort would be much less:
All done, busy day; brewing, Exam revision, and tiling the kitchen…!
*7th Oct ’12 – Down to 1012 @ 22°c think its done, should I or shouldn’t I dry hop, wasn’t going to… Tastes to have a similar pungency to Green Bullet / Bobek in the mix. If I do dry hop I may use Magnum to test out an idea.
*Bottled 13th Oct ’12 – with 80g White Sugar
*22nd Oct ’12 – Taster bottle, this isn’t bad, bags of flavour it will hopefully dry out a little in bottle and become more of the IPA its meant to be, I never bothered dry hopping btw.
*1st Nov ’12 – I’m actually really enjoying this beer, bags of flavour, plenty of body and a tingle of bitterness without being too harsh.
- In: Brewing
- 4 Comments
I shall be abstaining from brewdays for a while, normal service will resume once I’ve got through some of the beer!
This weekend I bottled my last two brews, Ta Moko II & Chinook Blonde and I’m still warm conditioning my Double IPA HopZilla IPA… so thats *6 crates of beer sat in our office/study/room/thing *Crates hold 20 bottles of 500ml or 24 x 330ml
Garage beer stocks are pretty high with lots more full crates stashed in there too… the Temperature control on the fermentation fridge has been turned off and the HLT is empty! (Hop Freezer is Full!)
There are Whitelabs yeasts in the fridge to brew with once I get going again:
- Brett WLP650 (Something with Flaked Oats and Wheat malt, lots of Cara/Crystal malts)
- Belgian Blend (Might get some more Date Molasses)
- Hefeweizen (I’ll go the whole decoction hog but hop with Amarillo & Nelson Sauvin +dry)
- Kólsch (Ideas for an IPA, a Malty Smoke beer, and maybe a Red Rye)
- San Diego Super (I’m sure I’ll have plenty of options for this one… US Brown re-brew with tweaks?)
- Edinburgh Ale (Something British, might do a Fuggle IPA and a Coniston Bluebird-esqe bitter)
Malts are pretty plentiful too:
Pale Malt, Lager Malt, Caramalt, Choc Malt, Choc Wheat, Crystal, Extra Dark Crystal, Flaked Barley, Flaked Oats, Pale Crystal, Carahell, Roast Barley, Carapils, Cara-munich Type III, Carafa Special III, Special B, CaraAmber, Medium Peat Smoked, Roasted Wheat, Black Malt, Brown Malt, Roasted Rye, Crystal Rye, Cara Vienna, Pale Oat Malt, Melanoidin, Flaked Wheat, Muinch Type I, Munich Type II, Amber Malt, Rye Malt, Rauch Malt, Flaked Maize.
Bulging Hop Freezer:
UK Cascade, Columbus, Challenger, Fuggle, Bobek, Goldings, Magnum, Summit, Willamette, Apollo, Chinook, Hersbrucker, Simcoe, NZ Cascade, Tettnang, Green Bullet, Aramis, Junga, Mount Hood, Spalter Select, Marynka, Cluster, Amarillo, Lubelski, Centennial, Riwaka, Citra, Northern Brewer, Galaxy, Super Alpha, Summer, Stella, NZ Hallertau Aroma, Pacific Gem, Warrior, Delta, Topaz, Nelson Sauvin, Pacific Jade, Pacifica, Wai-iti, Kohatu, Wakatu, Motueka, East Kent Golding, Sticklebract.
I wonder how long I can go without firing up the HLT? AG#88 will be a….????
BeerRitz in Headingley, Leeds and are holding a Home brewing competition with Copper Dragon in Skipton, the idea is to re-mix their beers creating your own version with their ingredients… this one is mine.
I’ll add the recipe after judging has been done so here is my pictorial brewday, and not forgetting today is National Homebrew Day.
Today is National Homebrew Day, this is my recipe:
The old tiny 15 Litre bucket Mash tun:
Tiny Mash tun’s copper manifold:
Malts, Gypsum & Temp:
Decide to use the THBF Water treatment calculator today so most of the salts go in the boil rather than in the mash, the mash only gets the gypsum for the volume of the Mash Liquor:
Aimed for 68°c & got 68°c for a 1 hour mash, I got 81.6% Efficiency:
The Tiny Mash tun only just squeezes a 15 litre brew-length sparge in:
Late Hops:
First runnings going into the copper with the First Wort UK Cascade hops and remaining liquor salts:
Bandit the brewers helper, chews plastic and stuff:
NZ Cascade hops:
Nice clear wort as the break material settles in the copper:
The money shot, near enough 1037 for me:
A pretty fast no fuss brewday, chilled to 20°c and pitched Safale us-05 yeast, fingers crossed I’ll get this fermented and dry hopped / Bottled in time for the closing date! Again I used the iPhone and Instagram for taking the brewday photos, its really very easy!
My previous National Homebrew Day brews AG#25 May Day and AG#54 – C.C.A.N
*8th May ’12 – Checked gravity 1013 @ 23°c dry hopped with 19g US Cascade Pellets, I’ll do a further 40g once the beer can be chilled down after reaching FG.
*9th May ’12 – Gravity 1010 @ 20°c Tastes lovely with the pellet dry hops already making a nice impact.
*12th May ’12 – Chilling to 17°c and dry hopped with over double what the first dry hop was. Will further chill to 13°-11°c then 4°c to drop the pellet hops out.
*Bottled 20 May ’12 – with 60g white sugar, tasting pretty good
Leedsbrew & BroadfordBrewer’s take on the ReMix Competition, anyone else done a blog of their entry?
I didn’t win so here’s my recipe in full
CopperRitzFermentable Colour lb: oz Grams Ratio
Pale Malt 5 EBC 5 lbs. 6.7 oz 2460 grams 100%Hop Variety Type Alpha Time lb: oz grams Ratio
UK Cascade Whole 5.7 % 60 mins 0 lbs. 1.1 oz 30 grams 25%
Columbus (Tomahawk) Whole 16.5 % 5 mins 0 lbs. 0.7 oz 20 grams 16.7%
NZ Cascade Whole 8.5 % 0 mins 0 lbs. 1.1 oz 30 grams 25%
Cascade Pellet 5.9 % 0 mins 0 lbs. 1.4 oz 40 grams 33.3%Final Volume: 15 Litres
Original Gravity: 1.037
Final Gravity: 1.009
Alcohol Content: 3.6% ABV
Total Liquor: 22 Litres
Mash Liquor: 5.9 Litres
Mash Efficiency: 75 %
Bitterness: 36 EBU
Colour: 6 EBC
This is actually drinking pretty well, i could happily drink quite a few of these and not get bored If I changed anything it would be to do a third or second heavier dry hop, and if it wasn’t to the competition rules I’d add a touch of wheat & 10% Carapils for body.
The winners are here http://ghostdrinker.blogspot.co.uk/2012 … er-is.html jolly good brewing guys
AG#78 – Pioneer’s Gold
Posted on: April 28, 2012
- In: Brewing
- 2 Comments
Pioneer’s Gold – A Barley wine for the National Homebrew Competition (or maybe the Year after) and using fresh live yeast from work. I’ve been meaning to try this for a while and after seeing Graeme Coates’ brewday I thought I’d go for it. I’ve gone for 15 litres as i don’t think its something I’ll drink very fast and its nicely left room in the copper for an extra 10L sparge to extract more from the mash. Hopping is some Pioneer pellets and older First Gold that were in the Hop-Freezer.
Fermentables:
Pale Malt – 90%
Wheat Malt – 5%
Caramalt – 4%
Amber Malt – 1%
Hops:
First Gold Whole 7.9 % @ 60 mins – 25g (after a long boil down first)
Pioneer Pellet 9.5 % @ 60 mins – 17g
First Gold Whole 7.9 % @ 10 mins – 17g
Pioneer Pellet 9.5 % @ 10 mins – 17g
First Gold Whole 7.9 % @ 0 mins – 39g
Pioneer Pellet 9.5 % @ 0 mins – 56g (What was left in the bag)
Golding Whole 5.1 % @ 0 mins – 3g (I ran out of First Gold so made a small extra addition)
Final Volume: 15 Litres
Original Gravity: 1.100
Final Gravity: 1.024
Alcohol Content: 10.1% ABV
Total Liquor: 26.7 Litres
Mash Liquor: 17.2 Litres
Mash Efficiency: 70 %
Bitterness: 73 EBU (The First Gold are pretty old now so i don’t expect to make this figure)
Colour: 22 EBC
Yeast: Thick skimmed yeast from Saltaire Brewery, fresh as you like.
Mash: 3 hours at 65°c, aimed for 66°c.
Liquor Treatment salts, shown here is the Calcium Chloride with Magnesium Sulphate on top:
Malts, Temp & Gypsum (Calcium Sulphate):
I went back to my old HTC Android for Strike Temp & Batch sparge volumes, this is even though I just got Beer Alchemy on the iPhone:
Pretty full, but I’m sure I could get a fair bit more in sometime:
First runnings, I recycled about 12 litres:
From the first sparge I collected 20 Litres @ 17.4 Brix so did an extra 10 Litre sparge and got 32 Litres @ 13.8 Brix, just over 64% Mash efficiency on the First sparge which I am quite happy with:
The first sparge was added kind of on the fly, then the extra 10 L sparge was added via my beta-version spinning sparge arm and the solar pump:
On the boil, I had to simmer for a while until I could turn up the heat:
Boiled off about 12-13 litres before adding the first hops, 3 hours 20 mins total boil time!:
Pioneer Pellets & First Gold hops:
I didn’t realise at this point but I think my refreactometer may have been exaggerating a bit:
Steep hops in for 30mins at Flameout:
I ended up collecting about 18 litres after doing some liquoring back towards the end of the boil (Thanks Refractometer, I should have stuck with my instincts as I would have been right!) did some small sugar additions to rescue a few OG points ended up with 1091. I pitched 100g of fresh, thick live yeast from work, MrMalty said 80-100ml, yeast pitched at 17°c:
A fairly relaxed day, second breakfast, drop the Mrs off at the train station, and walked the dogs while the mash was on, left the copper cleaning until the day after. Fermenter in the fridge set at 18°c for the first 24 hours then will hold at 20°c for a day or two before letting it free rise to 24°c, if its anything like at work this yeast will need a bit of TLC with a rouse every now and then.
This was my first Brewday taking all the photos on the iPhone, cracking photo quality and much easier than using the Canon DSLR, I use Instagram without any filters which kept everything in the nice square-blog-able format
*1st May ’12 – gravity at 1041 @ about 20°c, tasting very fruity almost like US hops!
*3rd May ’12 – Gravity 1027 @ 22°c tonight, not far from 1024 predicted FG, given it a good rouse… still tasting pretty sweet, hope some of this will dry out a bit.
*8th May ’12 – Down to 1015 @ 22°c I’m hoping its going to stop soon, it was 1016 yesterday so its getting close.
*9th May ’12 – Steady at 1015 now, chilling in stages probably 17°c then down to 11°c before bottling.
*12th May ’12 – Bottled with 90g White Sugar, got 45ish 330ml-ish bottles, the waiting game begins…..
*10th Sep ’12 – Tasting rather good, a nice malty toffee mouthful with warm lingering alcohol, a sweet lemoniness is also apparent.
AG#75 – Mr Brown Hawk
Posted on: March 10, 2012
- In: Brewing
- 2 Comments
Mr Brown Hawk- A Columbus Hopped American Brown Ale (Brown IPA!) My first American brown, all Columbus hopping with a substantial Dry Hop in the FV with a bit of vague reference from the ‘Brewing Classic Styles’ book, the recipes in there use a heck of a lot of Crystal so I’ve sort of gone for the middle-ground as i don’t think a 6.3% beer needs all that. I’m using liquor treatment for ‘Sweet Pale Ale’ which will hopefully bring out the maltiness.
I started and realised I didn’t have enough Pale malt so some of it is sub’d with Vienna & Lager malts, I’ll give it at least a 90min mash to try compensate for a: crap Bairds Pale & Lager, b: the less convertibility of Vienna malt.
Fermentables:
Pale Malt – 36.2%
Vienna Malt – 17.2%
Wheat Malt – 17%
Lager Malt – 16.6%
Carapils (Weyermann) – 5%
Caramalt – 3%
Chocolate Malt, Pale – 3%
Crystal Malt, Extra Dark – 1%
Chocolate Malt – 1%
Hops:
Columbus (Tomahawk) – 16.5 % @ 60 mins – 25g (FWH)
Columbus (Tomahawk) – 16.5 % @ 10 mins – 29g
Columbus (Tomahawk) – 16.5 % @ 0 mins – 41g
Columbus (Tomahawk) – Dry Hop 84g
Final Volume: 20 Litres
Original Gravity: 1.065
Final Gravity: 1.017
Alcohol Content: 6.3% ABV
Total Liquor: 30.8 Litres
Mash Liquor: 14 Litres
Mash Efficiency: 75 % (actually got 75.8%)
Bitterness: 66 EBU (BeerEngine Hop Utilisation set to 25%)
Colour: 76 EBC
Mash: 90mins @66c
Boil: 60mins
Yeast: Safale US-05 (2 packs)
The usual malts shot:
Checking for starch to see if fully converted, other than bits in the husks it was good after 2 hours:
First Wort Hops:
Flame-out hops steeped for about 20mins:
1057-ish, should have been 1065:
It was a total pain, running off to the FV it clogged up really quickly and I had to resort to a jug and a sieve, these Columbus hops have some fine particles! Pitched 2 packs of us-05 even though I didn’t hit my gravity 1058 vs 1065, the quicker the yeast gets going the better after all that sieve and jug malarkey! It looks as though I got about the right volume in the fermenter even if some of it looks rather murky from break material and some hop debris. Another reminder that I should make a big mesh hop-stopper!
So… presuming I’ve not infected it with a shed load of extracurricular home brewing activity, I’ll be giving this a nice big dry hop once its got to FG.
*17th Mar ’12 – after reaching FG 1012 and being chilled in 2 stages (17c for 24hours then 11c for 24 hours) I had a 50mm thick layer of hop debris, trub and yeast at the bottom of the FV, I’ve racked the clear beer off the top into a 15L bucket and dry hopped with 84g Columbus, I gave the bucket a blast of co2 prior to racking onto the hops. This has been put back in the FV Fridge and I’m cooling to 5c, I’ll give the hops a stir in later on.
*Bottled 24th Mar ’12 with 30g sugar to 15 Litres of beer, this should be around 2 volumes of co2 @ 5°c tastes very Dry-Hopped, quite possibly too much flavour and Lovely colour.
*29th Mar ’12 – Very Early taster bottle 
A little under carbonated, its a Juicy fruit bomb maybe too too fruity as I’d actually like to taste some of the Choc malts underneath the hop flavour. Tiny bit of sweet alcohol on the nose, I’m surprised the dry-hop character seems to have mellowed out quite soon though this is my first time with a singled hopped Columbus beer. I’m thinking I should have reserved myself more than half a kilo from the 5kgs I had, I think I could have given it a bit more bitterness which would off-set the fruitiness a little.
*5th Apr ’12 – Just having a glass of this… even though its carb’d pretty low, if i splash it into the glass it gives a lovely head that clings down the glass and the carbonation actually fits pretty well with the beer.
Fruitiness is settling back, bitterness is starting to come through, tasty beer…. I’m happy with this
AG#74 – Is it cos I is Black?
Posted on: February 26, 2012
- In: Brewing
- 6 Comments
Is it cos I is Black – A Black IPA to be served from Cask at the forthcoming NCB Competition meet at Saltaire Brewery. Ali-G reference init! This wall be heavily dry hopped in two stages, first in the FV with Pellet hops, and secondly in the cask with whole hop cones.
I’m managing to use up a few bag ends too, Flaked Wheat, Munich Malt, NZ Cascade & Motueka
Fermentables:
Pale Malt – 70.7%
Flaked Wheat – 8.7%
Munich Malt – 7.9%
Carapils (Weyermann) – 5.9%
Carafa Special III – 2.4%
Black Malt – 2.4%
Cara Aroma (Weyermann) – 1.9%
Hops:
Magnum – 14.5 % @ 60 mins – 20g – First Wort Hop
Columbus (Tomahawk) – 16 % @ 60 mins – 20g – First Wort Hop
Simcoe – 12.2 % @ 0 mins – 30g – 80c Steep
Chinook – 11.5 % @ 0 mins – 20g – 80c Steep
Nelson Sauvin – 13.0 % @ 0 mins – 20g – 80c Steep
Citra – 13.8 % @ 0 mins – 30g – 80c Steep
Summit – 14.3 % @ 0 mins – 30g – 80c Steep
Motueka (B Saaz) – 13.8 % @ 0 mins – 13g – 80c Steep
NZ Cascade – 10.2 % @ 0 mins – 11g – 80c Steep
Final Volume: 23 Litres
Original Gravity: 1.055
Final Gravity: 1.015
Alcohol Content: 5.2% ABV
Total Liquor: 34 Litres
Mash Liquor: 13.8 Litres
Mash Efficiency: 75 %
Bitterness: 60 EBU
Colour: 129 EBC
Yeast: Safale us-05
Mash for 90mins, Boil for 60mins
Liquor Treatment: General Purpose with the Graham Wheeler Calculator
Malts, malt temp & Salt additions:
Recirculating the first 4-5 litres, first Wort hops in the copper:
154g of 80c steep hops:
Should have been 1055, I got 1050, will do for me:
Pump Clip Design:
Mash efficiency was 83%, I added an extra litre in the sparge to compensate for extra hop-losses in the copper.
Another easy brewday followed by some messing around in Photoshop
I’ll update this post when I settle on which Dry Hops I’m going to use.
*4th March ’12 – Dry Hopped in FV with 20g of each of the following Pellets; Summit, Nelson Sauvin, Chinook & Cascade. Further whole hop dry-hopping in cask in about a weeks time.
*9th Mar ’12 – Racked this to cask and dry hopped with a further 25g Nelson Sauvin & 38g Simcoe (last of two bags), Allkleer Finings & 25g priming sugar used.
Bit of an pain having a homebrew FV fully dry hopped with Pellets, my Tea-ball syphon worked pretty well until the last couple of litres (critical litres to fill the cask) when it turned into a furry-pellet-blob and stopped flowing, the last little bit I had to jug a little murky beer into the cask.
So that is a Note-to-Self, don’t fully dry-hop the FV with pellets! I feel a mix of pellets & flowers would have not blocked up and a fully dry-hopped FV with flowers has no trouble at all syphoning.
I’d expect that if I had a chill-able Conical FV I could avoid most of this and draw-off the beer above the pellet sludge of rack-off the pellet debris first a day or so earlier.
*31st Mar ’12 – The first cask ale to run-off at the Northern Craft Brewers English IPA Competition at Saltaire Brewery
AG#72 – Toasted Oatmeal Stout
Posted on: January 21, 2012
- In: Brewing
- 7 Comments
Toasted Oatmeal Stout – Its about time I made a Roasted Barley based Stout so the other week I toasted some oats in the oven, checking every 5 mins and turning them, they just began to catch so I stopped at this point (Slight oven-smell to them, hope this doesn’t come through to the finished beer).
Nice solid bittering from Northdown and a little Challenger thrown in at the end too. The Malt bill is just an altered Guinness recipe splitting the 20% Flaked barley between Caramalt & Flaked Oats (should be better than Guinness).
Fermentables:
Pale Malt – 70%
Flaked Oats, Toasted – 10%
Roasted Barley – 10%
Caramalt – 10%
Hops:
Northdown – 6.2 % @ 60 mins – 42g (FWH)
Northdown – 6.2 % @ 30 mins – 42g
Northdown – 6.2 % @ 0 mins – 15g (15min Steep at 100c)
Challenger – 7.6 % @ 0 mins – 15g (15min Steep at 100c)
Final Volume: 23 Litres
Original Gravity: 1.046
Final Gravity: 1.015
Alcohol Content: 4% ABV
Total Liquor: 33.4 Litres
Mash Liquor: 12.2 Litres
Mash Efficiency: 75 %
Bitterness: 45 EBU
Colour: 211 EBC
Mash: 67°c for over 2 hours as I had stuff to do.
Yeast: Safale US-05
The malts, this actually dropped to 10°c, the Oatmeal is at the top so you can see the colour:
Copper filling onto First Wort Northdown hops:
I managed the protafloc all by my self:
Flameout hops going in:
Malt Recycling, she turns it into poo amazingly well:
One division in the meniscus, 1046 on the nail at 20°c:
Pretty slow but no fuss brewday, left the copper to clean later, in the fridge set at 19.5°c
According to BeerEngine I just topped 90% Mash efficiency on this brew, I shall put this down to the Oatmeal which simply disintegrated in the mash and the extended mash rest.
*Bottled 5th Feb ’12 with 60g White Sugar.
